CERAMIC TEAK OIL MARINE GRADE DECKS TRIM UV SALT STAIN PROTECTION - 16.9oz/500ml

CERAMIC TEAK OIL

DECKS, TRIM, RAILING

Use on All Un-Finished Wood Surfaces

• Recommended application is every 2-3 years.
• Advanced Ceramic Teak Oil Formula
• 100% Satisfaction Guarantee
• Made in America
• Safe & Effective on all Un-Finished Wood Surfaces.

          About The Product

• Supermaxx Marine Grade Ceramic Teak Oil is the strongest teak wood sealer available and features superior quality for superior results. Supermaxx Marine Grade Ceramic Teak Oil is both a hydrophobic and oleophobic formula that densifies and cures to a ceramic-like surface.  This high-quality Ceramic Teak Oil penetrates into wood surfaces and repels all staining materials.  This is important for your wood surfaces which provide breathability, and is extremely durable, long-lasting, and offers superior sealing protection.
• Additionally, it cures to a hard and durable surface providing a durable UV-resistant natural look with superior stain protection.
• Supermaxx Marine Grade Ceramic Teak Oil penetrates deep into all Teakwood surfaces, providing the ultimate protection under the surface and on top.  The amber clear ceramic teak oil provides a warm satin finish that fills the pores of the wood which keeps staining materials from entering and damaging the wood surface. 
• Supermaxx Marine Grade Ceramic Teak Oil also blocks unhealthy bacteria, germs, oils, and dirt which are not good for your surfaces, or your health.  As an added feature, Supermaxx Marine Grade Ceramic Teak Oil helps make cleaning quicker and easier with less maintenance.  Moreover, it is easier to use than typical solvent or water-based wood sealers allowing virtually anyone to apply a quality application without streaking.

Use on all your UN-SEALED Wood Surfaces

The World's Best Marine Grade Teakwood Sealer

Long Lasting

Faster, Better & Easier Cleaning

Made in America

Natural Look

Less Maintenance

Marine Grade

Better Solutions for Better Results

Product Directions:

It is highly recommended that before applying a sealer, you do a Deep Cleaning of your wood surfaces.  This gets the oils and dirt out of the pores which keeps them from being sealed in and allows the sealer to penetrate better into all the wood’s pores.

• Step 1 – Deep Cleaning

• It is recommended before applying a sealer that you first do a deep cleaning as detailed in the above “Deep Cleaning” sections.  After deep cleaning, we recommended that you allow the wood surfaces to dry for at least 12 hours before proceeding with applying a sealer. 
• Step 2 – Wipe, Brush, Pad, Spray, or Roll On.

• After your wood surface is completely clean and dry, apply the sealer onto the surface. Apply enough sealer so that the entire surface area is wet.  Once entirely wet with sealer, allow drying for at least 6 hours before use.
• 16.9oz/500ml
• FREE TECHNICAL SUPPORT